Skip to main content
Loading…
This section is included in your selections.

This sign standards (SI) section applies to the following zoning districts:
R1 R2 VR

The following standards shall apply:

A. Cross Reference.

1. Subdivision Entryway Signs. See JCC 20.70.090, EF-01 – Entryway feature standards.

2. Home Business Standards. See JCC 20.50.360 through 20.50.380 , home business standards.

B. Permanent Signs. Permanent signs shall not be permitted except as permitted for a home business.

C. Temporary Signs. A temporary sign shall be permitted as follows:

1. Permits. Standard temporary signs shall be exempt from obtaining an improvement location permit, but shall comply with applicable standards.

2. Location. A temporary sign shall be located ten (10) feet or more from any existing right-of-way, street, curb, sidewalk, driveway, and property line.

3. Illumination. Temporary signs shall not be illuminated.

4. Standard Temporary Signs. Standard temporary signs shall be permitted provided the following conditions are met.

a. Type. A standard temporary sign shall be a yard sign (e.g., sale of property, garage sale, and supporting local school teams).

b. Quantity. One (1) standard temporary sign shall be permitted for lots with frontage on one (1) street. Two (2) standard temporary signs shall be permitted for lots with frontage on two (2) or more streets if they have a minimum of 300 feet of combined street frontage. However, no two (2) standard temporary signs shall be closer than eighty (80) feet to one another.

c. Sign Area. The sign area for a standard temporary sign shall not exceed six (6) square feet per side.

d. Height Above Ground. No part of a standard temporary sign shall be more than four (4) feet above the ground.

e. Duration. A standard temporary sign may stay in place for up to thirty (30) days from the date the sign is erected. [Ord. 3-7-16A § 1; Ord. 12-27-11 § 5.75.]